- Overclock flex mod for Game Boy Advance - Provides easier wire free installation - up to 170% clock speed increase - Compatible with IPS screen mods - Medium difficulty level, soldering & crystal removal required.
Description:
The robot_retro GBA overclocker flex mod provides a simple way of overclocking or underclocking your Gameboy advance.
The installation process has been simplified by eliminating the manual wiring process (with the exception of a single optional LED indicator wire).
NOTE: Whilst the wire free installation makes it much easier, it should be noted that the crstal will need to be removed, ideally with hot air. Highlights:
- Capable of over and underclocking to 30%, 50%, 75%, 130%, 150% or 170% of base clock. - Increase speed = Press Start and Up - Decease speed = Press Start and Right - Easy flex installation with optional wire link to LED DL2A. - Power LED will blink faster when overclocked and slower when underclocked. Base speed is a solid green LED. - Top speed can be set to 170%, 150% or 130%
The regular install has a maximum speed of 170%. This is suitable for the stock LCD, Funnyplaying v2 or Hispeedido v2 (non-laminated) kits.
If using the Hispeedido Laminated v5, bridge solder jumper S1 to limit the speed to 150%.
If using Funnyplaying 3.0 Inch Laminated, bridge solder jumper S2 to limit the speed to 130%.
Other Features:
Very low power consumption. Measured as <15mA using the Nordic Power Profiler Kit II. Accurate base clock (4.194Mhz). Measured as >0.01% accurate. There is will no difference between this mod and the original GBA crystal at stock speeds.
Installation:
Remove the GBA crystal. Recommended to use a hot air station for this step.
Install the flex as per photos.
Solder the points shown within the pink circles (total of 6 solder points). It is recommended to use flux for this step.
OPTIONAL: Run and wire between the flex and test point DL2A (both shown inside the yellow circles). This will make the power LED blink faster/slower when over or underclocking.
Speed Limiting:
- Bridge solder jumper S1 to limit the speed to 150%. - Bridge solder jumper S2 to limit the speed to 130%. - Developed in collaboration with RJS FPGA
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Platform:
Brand: Robot Retro
Ean:
Prices shown include taxes for the following countries/regions:
European Union – VAT (IOSS) Australia – GST Norway – MVA United Kingdom – VAT
If you're ordering to one of the above regions, VAT or sales tax is collected at checkout, and your order will be delivered without any additional tax or duty charges.
For all other countries, local import VAT, sales tax, or customs duties may be charged by the carrier prior to delivery. Please check your local customs regulations before ordering — you are responsible for any additional import charges that may apply.
