Hookup wire 28AWG (5 colour) modding kit including heat shrink tubing & kapton tape | ZedLabz

Features: 

- Hookup wire kit ideal for modding projects.
- Two 50mm length pieces of heatshrink tubing. 
- Two 50MM length pieces of Kapton tape
- Five 600MM length hookwire in assorted colours.
- 28AWG wire thickness , approximately 0.8mm thickness (stripped)

Description: 

Grab this hookup kit with all the essentials for any gaming console modding project.

This kit is the ideal set of wires and essentials for installing a Raspberry Pico (Picoboot) inside a GameCube or any number of modding projects.

Warning: Soldering is required to install a Pico - Soldering Difficulty level medium, soldering experience is required, this install involves soldering to legs of an IC chip on the motherboard which are quite small, particularly for the less experienced in soldering. It is recommended you seek a professional installer if you are not used to soldering small pins. A good quality temperature controlled soldering iron and flux is advised. Incorrect installation couild result in things such as solder bridging pins on the IC chip, bad soldering may damage the motherboard once turned on, installation of a Pico into a Gamecube is done at the installers own risk. 

Included are 5 600mm length 28AWG hookup wires in 5 colours, ideal for colour coding and keeping track of your wire routing.

Also included is two 50mm length pieces of heatshrink which can be cut down into smaller pieces as needed, great for keeping wires neat, covering exposed wire or protecting wire from sharp areas.

Two 50mm length pieces of kaptop tape are helpful for insulating solder points or PCB boards as required.

When installing a Pico into the GameCube you will need to remove the heatsink, in doing so the thermal pads might become damaged, or they might simply be warn and in need of replacement, we offer thermal pads specifically for the GameCube in store, it is recommended that you purchase new thermal pads when fitting a pico.

If repairing or modding of a games console usually requires the disassembling of the console and is a DIY undertaking, it will void any warranty and is done at owners risk.

Platform
Colour
Manufacturer	ZedLabz
EAN	5056026470209
Weight	10g